OUR PRODUCTS

 

PRODUCT

Today, we face an urgent need to reverse the amount of waste that penetrates our global ecosystem.  The good news, the green byproducts that QCI companies produce can completely eliminate the high amount of municipal solid waste, waste plastic, and waste tires from ever entering our sanitary landfills. Our focus has always been on the quality of our end products, which have been independently validated by third parties. Our new revolutionary technologies are capable of using almost all waste contents within MSW, Waste Plastic, and Scrap Tires with high efficiencies.

​G-Fuel™

  • Low Sulfur—Less than 5ppm.

  • Hydrocarbon boiling point range is 100°–400° F (or as customer requires)

  • Anti-knock Index up to 83 without oxygenates

  • Based upon the customers requirements, aromatic content can range from <1% to 15%.

​Q-CET™

  • Cetane Number (CN) of diesel fuel is a measure of its‘ ignition quality.' Premium to high Cetane Number diesel fuels present improved engine performance and emission reduction advantages.

  • Cetane Number booster from standard pipeline fuels.

  • Hydrocarbon boiling point range from 560° to 650° F.

  • High BTU content.

  • Shortened ignition delay. Improved diesel fuel ignition quality.

  • Improved cold start. Better fuel combustion. Better fuel economy.

  • Q-CET™ is a blend of 2-Ethylhexyl Nitrate (2-EHN) which improves the Cetane Number.

  • A blend of this product with a 40 CN #2 diesel at 1:3 ratio will improve the fuel to premium diesel standard (~55CN) with a 25% volume addition to the entire bulk volume.

​QCI-MSW™ Biomass

  • Food, vegetable wastes, paper stocks, and lawn clippings are reduced to fibers and are thermo-mechanically pulped.

  • The process and the Biomass recovered from the MSW meet the CEN 15747 requirements and qualify (US EPA) as a renewable fuel.

  • The ultra-clean QCI-MSW™ Biomass higher heating value (HHV) is on average 8,200 BTU’s per lb. (as tested per US EPA 2015 MSW composition).

  • 100% of waste is sterilized; all bacteria and viruses are killed.

  • The QCI-MSW™ Biomass byproduct is virtually odor free.

​D-Fuel™

  • Low Sulfur—Less than 5ppm.

  • Stabilized low Olefin content.

  • Burns very “clean” with no visible smoke.

  • Hydrocarbon boiling point range is 300°–650° F (or as customer requires)

  • Good lubricity value.

  • Great “feeder” product for the off-road diesel and fuel oil industries.

  • Based upon the customers requirements, aromatic content can range from <1% to 15%.

​Q-SOL™

  • Low Sulfur—Less than 8ppm.

  • Hydrocarbon boiling point range is 100°–330° F (or as customer requires).

  • Large percentages of PURE (i.e. n-octane) compounds within this"cut."

  • Extremely low Olefin content.

  • Very HIGH Napthene content.

  • Based upon the custom.

​Q-KSOL™

  • Low Sulfur—Less than 8ppm.

  • Extremely LOW Olefin content.

  • Burns very “clean” with no visible smoke.

  • Hydrocarbon boiling point range is 330°–560° F (or as customer requires).

  • From winter blends to D-1, this product makes an ideal diesel fuel additive during winter months.

  • Great “feeder” product for the solvent and fuel oil industries.

  • Based upon the customers requirements, aromatic content can range from <1% to 15%.

QCI-TCF™ ISOBLACK™

  • N600 and N700 performance characteristics.

  • Used as a drop-in replacement for rubber products, plastic compounders and tires.

  • Successfully tested in tires, extruded goods, belts, hoses, weather-stripping, wiper blades, roofing, black plastic components, etc...

  • Significant cost savings as a partial blend with virgin carbon black rubber or plastic formulations.

  • Independently validated by third parties such as SAIC / R.W.Beck and the Department of Energy National Energy Technology Laboratory (NETL).

QCI's Green Byproducts

QCI is passionately committed to eliminate pollution by developing sustainable Green byproducts

4.JPG

QCI-MSW

  • BIOMASS

  • ENERGY

  • *All waste plastic goes to QCI-PCF™ Machine

  • *All waste rubber goes to QCI-TCF™ Machine

QCI-PCF

  • G-Fuel™

  • D-Fuel™

  • Q-CET™

  • Q-SOL™

  • Q-KSOL™

  • ENERGY

QCI-TCF

  • ISOBLACK™

  • CARBON BLACK

  • *All waste oil gets processes through QCI-PCF™ machine

  • Facebook
  • YouTube
  • Instagram
  • LinkedIn Social Icon
  • Twitter

Copyright © QCI, LLC. All rights reserved.